These are then stapled directly to the stiffening tubes, or are offset again, like the frontage, using standard 40 mm spacers. The stiffening principle of the full-height hinges, used earlier for large doors, is used again here, but horizontally this time, to ensure the cohesion of the whole construction A horizontal tubular structure links all of the constructions panes of glass the assembly (tubes & glass) forms a very rigid structure that does not lose its shape. All of these products are highly UV ray-resistant.Ĭonstruction of "free-standing" glass volumes: "Free-standing» here means glass constructions which are not -or very little at least - supported by solid partitions (walls, posts, metal structures, etc.) and which are not attached to the ceiling. Seal in the lower section, or the upper section of the partition) or L-shaped PMMA profiles which are also self-adhesive and completely transparent. NOTE: ADLER SAS has several solutions to seal these frontage elements: auto-adhesive "bumper" seals to glue to the edge of one of the two panes of glass and pressed automatically between adjoining frontage elements the same as recommended for the (*) Advantage of the 25 mm diameter for ADLOCK hinges: They may be produced on request, as a special manufacture, in 35 or 45 mm diameter.
These tailor-made hinges - their height is related directly to the door height - are produced as standard in 25 mm. The inserts are the same as for the short hinges and enable the same installations. Through the ADLOCK attachment points, significant shearing to be supported (up to 130 kg per point) so very heavy and extraordinarily large doors.įor example, among recent installations produced with this type of hinge, we can mention 230 kg doors in tempered 12.12.4 (height 3m x width 1m30) 250 kg in 15 mm tempered monolithic glass (height 3m40 x width 2m20) or even 320 kg, 3m87 tall and 2m70 wide.
Adlock free key professional#
The door to be stiffened significantly, so constructions to be made with very strong rake for which traditional "Clarit" type hinges are not suitable - the door vibrates at the top with the slightest stress, leading to choppy rotation, often a slippage of the glass in the hinges, even early destruction of the ground pivot and so on - where professional rules recommend the use of very thick glass - which becomes useless. 4 in total), the acceptable door weight with a full-height hinge is doubled
Adlock free key plus#
The door weight to be distributed, plus the extra load imposed by current DTU standards (+100kg at the end of the door in Class 4, the most strict) across all of the door's screwing points when only the low hinge points are used in the case of short hinges with the same total number of attachment points (at least 2 low, 2 high in the case of short hinges, i.e. Full-height hinges: For heavy or very strong rake doors, or doors that are very wide, it is strongly recommended and often necessary to use full-height hinges.
0 kommentar(er)
